Instruction set for bingo machine saga 2

Monday, 25 January 2010 13:11

SAGA 2 OPERATING INSTRUCTIONS

Connect the power supply and switch on at the mains.

Do not touch any of the switches whilst connecting the power supply. (See below.)

The machine enters the test routine and resets to 90. (Left decimal point blinking)

Press the red SELECT switch.

Zero is now displayed. (Right decimal point blinking) See Setting a Jackpot Number below.

If a jackpot number is NOT required press the red select switch.

Zero is displayed ready to start the game.

Setting a Jackpot Number.

After setting the game length (90).

Press the blue RECALL switch to increase the jackpot number by 1 for each press.

Use the black TOTAL CALLS switch to decrease the number in the same way.

The jackpot changes from 0 – 35 with one press and from 35 – 0 with one press.

When the required jackpot number is displayed, press SELECT.

Zero is now displayed.

When setting the jackpot number the right decimal point flashes.

The last jackpot number selected is retained in memory when the unit is disconnected and will be displayed when the machine is next used.

Playing Bingo.

Press and hold the red SELECT switch to select a number.

Release the switch to display this number to the audience.

To check the number of calls made press and hold the TOTAL CALLS switch.

To recall the numbers called in reverse order press the blue RECALL switch.

The RECALL switch can also be held down for automatic recall of numbers.

In recall mode both decimal points flash alternately.

Press the red SELECT switch to return to select mode.

The last number called is shown blinking on the 1 – 90 matrix.

If a jackpot number is set, the displays flash when that number is reached.

To clear the machine at the end of a game press the red SELECT switch, whilst holding down the black TOTAL CALLS switch.

Memory Back Up.

The machine retains the current game in the event of the power being disconnected.

If a previous game is displayed at switch on, clear as above.

Memory back up does not require batteries.

External Display.

This socket allows SAGA 2 to be connected to another display unit EDU 100.

Power Supply.

Regulated 9 volts d.c. 350 mA. Polarity: Centre Negative.

Note: Do not use an unregulated power supply.

Do not use a power supply greater than 9 volts d.c.

If Saga 2 will only select numbers 1-75, clear the game and unplug the power supply.

Press & hold down the blue button, plug in the power supply, and then release the blue button.

Saga 2 is now re-set to play 1 – 90 bingo.

TYVEK Wristbands

Tyvek wristbands are ideal for security and identification. One size fits all and no more stamping peoples hands. Tyvek wristbands are made of fibres that are tear and stretch resistant while at the same time being waterproof meaning that they can be used for a wide variety of uses including swimming pools and water attractions.

The wristband is easily applied to the wrist using a high quality adhesive strip which makes it fully adjustable, comfortable to wear, and ideal for children. Many of our customers use tyvek wristbands for parties, festivals and groups.

Simply place round the wrist of your customer, make tight enough so it isn’t loose, then pull off the glue protector and stick. The peel & seal system is tamper proof and non transferable. A “www” pattern is disrupted when the ends are prised apart.

Tyvek Standard Wristbands Prices

Quantity 50 100 1,000

Price £3.38 £5.04 £28.80

The wristbands can be customised with your choice of text and images at a small premium.

Tyvek Printed Wristbands Prices

Quantity 50 100 1,000

Price £4.97 £6.67 £42.60

VINYL Wristbands

Made of 100% vinyl these wristbands are for long-term use and are more durable than the tyvek wristband. They cannot be stretched or removed without cutting them and they are completely waterproof and therefore ideal in wet areas such as swimming pools and water parks.

The highly visible colours mean they are easily identifiable. We do not currently print custom text and images on these wristbands, however, you can add your own details with permanent markers. If you would like custom wristbands why not have a look at the printed tyvek wristbands where we can print your choice of text and graphics directly on the wristband.

The wristbands come in strips and are plain in colour.The vinyl wristbands is easy to use simply place around the customers wrist, making it tight enough so that it isn't loose, bend over the popper and push into the rivet, causing it to snap shut.

Vinyl Wristbands Prices

Quantity 50 100 1,000

Price £4.50 £7.65 £69.75